Skip to main content

Set the Adhan's volume on Alexa

Add a Volume action to your Adhan routine in the Alexa app, before MAWAQIT. Your Echo then takes that volume at each prayer.

Written by MAWAQIT BOT

Coming with the next update. This article only applies from the next update of MAWAQIT on Alexa. Until then, some screens may look different.

Left as it is, the Adhan plays at whatever volume the Echo is on. For the same volume at each prayer, add a Volume action to your Adhan routine, before MAWAQIT. In 10 steps, then a test.

Open your Adhan routine

  1. Open the Alexa app. At the top left, tap the menu ≡.

    The top of the Alexa app's home screen, with the menu button at the top left.

  2. Tap Routines.

    The More screen of the Alexa app, with Routines in the left column.

  3. Tap your Adhan routine, “MAWAQIT Adhaan detects motion”.

    The Routines screen, with the MAWAQIT Adhaan detects motion routine.

  4. Under ALEXA WILL, tap Add another action.

    The Adhan routine, with Add another action under ALEXA WILL.

Choose the volume

  1. In the list of actions, tap Device Settings.

    The Add New list of actions, with Device Settings.

  2. Tap Volume.

  3. Drag the slider to the volume you want, then tap Next at the top right.

    The Volume screen, with its slider and Next at the top right.

  4. The Confirm screen shows the volume you chose, for example “Alexa will set volume to 5”. Tap Next at the top right. The app adds the action and saves the routine.

Check the order, then finish

  1. Under ALEXA WILL, the new action, “Set volume to 5”, comes first, above Open MAWAQIT. If it is below, drag it up by the two lines on its left.

    The Adhan routine, with Set volume to 5 above Open MAWAQIT.

  2. At the bottom, tap Finish.

    The bottom of the Adhan routine, with the Finish button.

Important. MAWAQIT must stay the routine's last action. An action after MAWAQIT cuts the Adhan off.

Test it

  1. On alexa.mawaqit.net, at the bottom of your dashboard, tap Help.

    The bottom of the alexa.mawaqit.net dashboard, with the Help link.

  2. Tap Too loud, too quiet or cut off. Under “The sound is set in the routine”, tap Test my routine.

    The Help sheet at The sound is set in the routine, with the Test my routine button.

  3. Within 30 seconds, the website shows “All set”. Stay near your Echo, then tap Hear a short part on my Echo. After a short countdown, your Echo plays “Allahu Akbar”, at the volume you chose.

    The Test my routine sheet at All set, with the Hear a short part on my Echo button.

A quieter Fajr?

The Adhan routine starts at every prayer, at the same volume. For Fajr, you can choose Chime or Announcement instead of the Adhan, on the site: Choose what Alexa does at each prayer.

While the Adhan plays

  • The – and + buttons on the Echo change the volume. Your Volume action sets yours again at the next prayer.

  • “Alexa, pause” pauses the Adhan, and “Alexa, resume” plays it again.

  • “Alexa, stop” stops it.


Still not working?

Still stuck? Open Help, then tap Contact support.

Did this answer your question?