Skip to main content

Alexa announces a doorbell before the Adhan

MAWAQIT Adhaan is a doorbell, and Alexa announces it. Make it a motion sensor, and the announcement goes away.

Written by MAWAQIT BOT

Coming with the next update. This article only applies from the next update of MAWAQIT on Alexa. Until then, some screens may look different.

Before the Adhan, your Echo devices say someone is at the door, and your phone shows an alert. Nobody rang: it is MAWAQIT Adhaan, which starts your Adhan routine.

Why

Until October 2026, MAWAQIT Adhaan was a virtual doorbell. At each prayer, MAWAQIT presses it to start your Adhan routine, and Alexa announces every press, on every Echo and on your phone. In the Alexa app, the device is often still called MAWAQIT Azan.

The fix: switch to a motion sensor

A motion sensor starts the routine and announces nothing. It is virtual too: it detects nothing in your home. In 7 steps:

  1. On alexa.mawaqit.net, at the bottom of your dashboard, tap Help.

    The bottom of the alexa.mawaqit.net dashboard, with the Help link.

  2. Tap The Echo says someone is at the door.

    The Help sheet, with The Echo says someone is at the door under Adhan not starting?

  3. Under “That's the doorbell announcement”, tap Switch to a motion sensor. The “Switch to a motion sensor” sheet opens, and says what changes.

    The Help sheet at That's the doorbell announcement, with the Switch to a motion sensor button.

  4. Tap Switch to the sensor. The site opens the routine guide, “Create the Adhan routine”, which confirms “MAWAQIT Adhaan is now a motion sensor.”

    The Switch to a motion sensor sheet at MAWAQIT Adhaan becomes a motion sensor, with the Switch to the sensor button.

  5. Follow the guide: create the new routine, on Detected, then test it (Create and test the Adhan routine on Alexa).

    The Create the Adhan routine sheet, confirming that MAWAQIT Adhaan is now a motion sensor.

  6. In the Alexa app, open Routines, then tap the old routine, the one on Pressed. It is turned off and no longer starts.

  7. At the top right, tap ⋮, then Delete Routine.

Important. Your old routine stops at step 4. Until the new one exists, the Adhan does not play.


Still not working?

Still stuck? Open Help, then tap Contact support.

Did this answer your question?