Skip to main content
All CollectionsManuals
MAWAQIT For TV Installation Guide
MAWAQIT For TV Installation Guide

The official MAWAQIT Installation guide

Ibrahim avatar
Written by Ibrahim
Updated over a month ago

MAWAQIT is a non-profit organization, all our services are free and without ads.

Don't hesitate to support this blessed project by making a donation here https://donate.mawaqit.net

The prophet of Allah said: "Charity does not decrease wealth" Barraka Allahu fik and may Allah reward you 🤲

Before installation, you need to register and add your mosque or home on our website.

  1. Register here

  2. Log in and register your mosque, bring two photos of the mosque (exterior / interior).

Now you have 3 options to install MAWAQIT system at your mosque or home

OPTION 1: Order the MAWAQIT TV OR MAWAQIT BOX

Our team of volunteers have developed a Plug & Play android TV system that offers a better user experience, easy to use and optimized for mosque or home use.

You can order it from our shop.

NB: The internet connection is only required at the first start...

Indeed to synchronize the information of the mosque you must connect the box to the internet, then it works without internet, but for any update of the information, you must reconnect it, a simple connection sharing with your smartphone is enough.

You cannot order the MAWAQITBOX on our online shop?

Contact our installation partners in your country by WhatsApp (Message ONLY)

🇩🇿 Algeria

Abd Alhak +213668730789

Mohammed +213559375158

🇶🇦 Qatar

🇹🇳 Tunisia

🇲🇦 Morocco

Abd Al-Ilah +212777111788

🇹🇷 Turkey

OPTION 2: Install our Android TV application on the box or TV of your choice

You can if you wish, install our application dedicated to the android TV on the android box of your choice or on a SmartTV under android 9 and above.

Just go to Google play and search for MAWAQIT or download the apk and install it directly. Watch how to open and configure MAWAQIT For TV application

That's it, you are ready to enjoy MAWAQIT network and start displaying your accurate prayer times and useful information from the mosque.

OPTION 3: Install our system on the Raspberry pi 4

This option is more expensive and less recommended as it is no longer maintained.

Just buy a Raspberry Pi 4 and follow the installation steps below :

  1. Download our system image here

  2. Connect the micro SD card to your computer through the dedicated port or to a USB SD card reader

  3. Download the Etcher software then install it on your computer

  4. Flash the mawaqit.xz system image on the micro SD card with Etcher

Congratulations! You now installed the system image on the memory card of your Raspberry Pi. Just it in to any TV Screen (hdmi cable required), and follow the steps to activate your Mosque.


Need more? Have a look at our 👉 YOUTUBE channel for some more video guides.

Did this answer your question?