Before installation, you need to register and add your mosque on our website.

  1. Register here

  2. Log in and add your, bring two photos of the mosque (exterior / interior) and articles or proof of incorporation of the mosque (like an Energy bill).
    For Muslim countries where the energy is often paid for by the authorities of the country, it is sufficient to fill in this request form Arabic | English | French.

    This is not required for home or other types of installations.

Now you have 2 options to install Mawaqit system at your mosque or home

OPTION 1 : Install our Android TV application

We do highly recommend this option because it's easier and cheaper. Android Boxes are available at stores or online marketplaces.


📶 INTERNET REQUIRED (Cable, Wi-Fi, 4G, 5G)
However, this version requires an internet connection

(This version will soon also work even when Internet is offline, this upgrade is coming soon insh'Allah).

Here 2 Android TV boxes we do recommend :

*If you buy them from the link below, MAWAQIT will receive a small commission from Amazon, this help us to keep our service free of charge 🙏

Xiaomi Mi Stick

Xiaomi MI TV Box S

You can also use any Smart TV that runs on Android 9.0 and above, and simply install the MAWAQIT app available on Google Play.

See here how to Open and setup Mawaqit App.

That's all, you are ready to enjoy being part of the MAWAQIT network, and start displaying accurate prayer times and useful mosque information.

OPTION 2: Install our system on the Raspberry pi 4

Online + Offline mode (For mosques with no internet access).

This option is more expensive, and is recommended for you if you don't actually have an internet connection (or if it's very unstable).

Just buy a Raspberry Pi 4 and follow the installation steps below :

  1. Download our system image here

  2. Connect the micro SD card to your computer through the dedicated port or to a USB SD card reader

  3. Download the Etcher software then install it on your computer

  4. Flash the mawaqit.xz system image on the micro SD card with Etcher

Congratulations! You now installed the system image on the memory card of your Raspberry Pi. Just it in to any TV Screen (hdmi cable required), and follow the steps to activate your Mosque.

See now how to launch and setup Mawaqit on the Raspberry pi 4.


Need more? Have a look at our 👉 YOUTUBE channel for some more video guides.

Did this answer your question?